Coolant temperature sensor - r + r
- Make
- Fiat
- Model
- Doblò Factory Service Manual
- Year
- 2000–2010
- Section
- Petrol injection system › Coolant temperature sensor - r + r
Coolant temperature sensor - r + r
Removing
Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R.
1. Disconnect the electrical connection for the coolant temperature sensor.
| Description | Connector | |
|---|---|---|
| 1 | I.E. engine temperature sensor | See K45 COOLANT TEMPERATURE SENDER UNIT ( ENGINE ) |
2. Undo the coolant temperature sensor and remove it.
Refitting
Tighten the coolant sensor to torque.
| Fastening | Component | dia | Value (daNm) | |
|---|---|---|---|---|
| Sensor | COOLANT TEMP SENSOR | M16 | 3.4 |
Connect the electrical connection for the coolant temperature sensor.
| Description | Connector | |
|---|---|---|
| I.E. engine temperature sensor | See K45 COOLANT TEMPERATURE SENDER UNIT ( ENGINE ) |
Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R.
Removing
Disconnect the negative battery lead.
| Description | Connector | |
|---|---|---|
| Battery | See A001 BATTERY |
Op. 1048A32 HOSE FROM AIR FILTER TO INTAKE MANIFOLD - R.R.
1. Disconnect the electrical connection for the engine coolant temperature sensor.
| Description | Connector | |
|---|---|---|
| 1 | I.E. engine temperature sensor | See K45 COOLANT TEMPERATURE SENDER UNIT ( ENGINE ) |
2. Undo the engine coolant temperature sensor and remove it.
Refitting
Place the engine coolant temperature sensor in its housing and tighten it to the recommended torque.
| Fastening | Component | dia | Value (daNm) | |
|---|---|---|---|---|
| COOLANT TEMP SENSOR | M12 | 2.4 |
Connect the engine coolant temperature sensor electrical connection.
| Description | Connector | |
|---|---|---|
| I.E. engine temperature sensor | See K45 COOLANT TEMPERATURE SENDER UNIT ( ENGINE ) |
Op. 1048A32 HOSE FROM AIR FILTER TO INTAKE MANIFOLD - R.R.
Connect the negative battery lead.
| Description | Connector | |
|---|---|---|
| Battery | See A001 BATTERY |
Removing
- Disconnect the negative battery terminal.
1. Disconnect electrical connection (1a) and unscrew the coolant temperature sensor (1b).
| Description | Connector | |
|---|---|---|
| 1a | Engine coolant temperature sensor/sender unit | See K036 ENGINE COOLANT TEMPERATURE SENSOR/SENDER UNIT |
Refitting
- Place the engine coolant temperature sensor in its housing and tighten it to the recommended torque.
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Engine coolant temperature sensor | M12 | 1.8 ÷ 2.2 | 1.2 8v 1.4 8v |
- Connect the engine coolant temperature sensor electrical connection.
- Connect the negative battery terminal.
Parts & tools for this job Staging For 2000 Fiat Doblò
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.