ENGINE OIL - Check level and top up, if necessary

Operation 1084A10 · Indicators/check devices

1. Using the dipstick, check that the engine oil level is between the MIN and MAX marks on the dipstick.

This check should be carried out with the vehicle on a flat surface, several minutes after the engine has been switched off.

2. If necessary, top up the level introducing the recommended oil after having removed the cap.

For the optimum operation of the engine in particularly harsh climatic conditions (starting at temperatures as low as -35° C), use the recommended oil for the engine lubrication circuit.

Never exceed the MAX level.

Fit the cap.

Start the engine and leave it to idle for a few seconds, then wait a few minutes after switching it off.

Check the level of the oil once again, then replace the dipstick.