Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Doblò Factory Service Manual (2000-2010)08 · Engine
08 · Engine

Engine oil vapour intake pipe - r + r

Make
Fiat
Model
Doblò Factory Service Manual
Year
2000–2010
Section
Emission control system › Engine oil vapour intake pipe - r + r
EngineEngine oil vapour intake pipe - r + r

Engine oil vapour intake pipe - r + r

Operation 1080D24 · Crankcase vapour/gas recirculation system

1.2 8v

Removing

Op. 1048A10 AIR FILTER ASSEMBLY - R.R.

1. Remove retaining bands (1a) and disconnect the breather pipe from cam cover (1b) and from air intake manifold (1c).

Engine oil vapour intake pipe - r + r

Refitting

Fit the pipe and connect it to the breather on the cam cover. Secure with a retaining collar.

Connect the pipe to the intake manifold.

Op. 1048A10 AIR FILTER ASSEMBLY - R.R.

1.6 16v

Removing

Position the vehicle on a lift.

Disconnect the negative battery terminal.

DescriptionConnector
BatterySee A001 BATTERY

Op. 1048A32 HOSE FROM AIR FILTER TO INTAKE MANIFOLD - R.R.

Op. 7055B54 PROTECTION/GUARD UNDER ENGINE - R.R.

Raise the vehicle on the lift.

1. Open collar (1a) and disconnect oil vapour recovery pipe (1b), then lower the vehicle.

Engine oil vapour intake pipe - r + r

1. Remove the engine oil vapour recovery pipe by removing from the engine compartment.

Engine oil vapour intake pipe - r + r

Refitting

Refit the engine oil recovery pipe and secure it using the bands.

Op. 1048A32 HOSE FROM AIR FILTER TO INTAKE MANIFOLD - R.R.

Op. 7055B54 PROTECTION/GUARD UNDER ENGINE - R.R.

Connect the negative battery terminal.

DescriptionConnector
BatterySee A001 BATTERY

Remove the vehicle from the lift.

1.9 JTD 8V

Removing

Position the vehicle on a lift.

Proceed with the removal

Op. 7055B54 PROTECTION/GUARD UNDER ENGINE - R.R..

1. Loosen the collar and disconnect the engine oil vapour inlet pipe from the T-connector.

Engine oil vapour intake pipe - r + r

1. Loosen the collar and disconnect the engine oil vapour inlet pipe from the cam cover and remove.

Engine oil vapour intake pipe - r + r

Refitting

Refit the oil vapour inlet pipe in its seat and connect to the cam cover and secure with the relevant band.

Connect the engine oil vapour intake pipe to the T-connector and tighten the collar.

Proceed with the refitting

Op. 7055B54 PROTECTION/GUARD UNDER ENGINE - R.R..

Remove the vehicle from the lift.

1.4 8v

Removing

Op. 1048A10 AIR FILTER ASSEMBLY - R.R.

1. Loosen collar (1a) and remove the engine oil vapour inlet pipe (1b) from the air filter.

Engine oil vapour intake pipe - r + r

Refitting

- Refit the oil vapour inlet pipe in its seat and connect to the air filter with the relevant band.

Op. 1048A10 AIR FILTER ASSEMBLY - R.R.

Parts & tools for this job Staging For 2000 Fiat Doblò

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.