Workshop Manuals Factory service & repair Fiat
Fiat Doblò Factory Service Manual (2000-2010)08 · Engine
08 · Engine

Engine RPM SENSOR - R.R.

Make
Fiat
Model
Doblò Factory Service Manual
Year
2000–2010
Section
Diesel fuel injection › Engine RPM SENSOR - R.R.
EngineEngine RPM SENSOR - R.R.

Engine RPM SENSOR - R.R.

Operation 1060G20 · Pressure pump electric control

Removing

Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal.

NameConnector
BatteryA1

Carry out - 7055B54 under-engine guard - r r.

1. Disconnect the electrical connection for the rpm sensor.

NameConnector
1RPM sensorK46

2. Undo the bolt (2a) and remove the engine rpm sensor (2b).

Engine RPM SENSOR - R.R.

Removing

Position the vehicle on the ramp.

Ensure that the ignition key is in the stop position, then disconnect the battery negative terminal.

NameConnector
BatteryA1B

Proceed with the removal - 7055B54 under-engine guard - r r.

1. Disconnect the electrical connection for the rpm sensor.

NameConnector
1RPM sensorK46
Engine RPM SENSOR - R.R.

Refitting

1. Place the rpm sensor (1a) in its seating and secure it tightening the bolt (1b) to the specified torque.

FasteningComponentØ

Value

(daNm)

1bBoltENGINE RPM SENSORM6(Engine crankcase side) 0.8 ÷ 1.0

2. Connect the electrical connection for the rpm sensor.

NameConnector
2RPM sensorK46
Engine RPM SENSOR - R.R.

1. Undo bolt (1a) and remove rpm sensor (1b).

Engine RPM SENSOR - R.R.

Carry out - 7055B54 under-engine guard - r r.

Connect the battery negative terminal.

NameConnector
BatteryA1

Refitting

Replace the rear wheel rpm sensor in its housing and fix it using the bolt.

Connect the electrical connection for the rpm sensor.

Proceed with the refitting - 7055B54 under-engine guard - r r.

Connect the battery terminal (-).

Remove the car from the ramp.

Parts & tools for this job Staging For 2000 Fiat Doblò

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.