Heater plugs CONTROL UNIT - R.R.
- Make
- Fiat
- Model
- Doblò Factory Service Manual
- Year
- 2000–2010
- Section
- Engine starting › Heater plugs CONTROL UNIT - R.R.
Heater plugs CONTROL UNIT - R.R.
Removing
Make sure that the ignition key is in the OFF position; then disconnect the negative battery terminal.
| Name | Connector | |
|---|---|---|
| Battery | See A1B BATTERY ( BATTERY POSITIVE ) |
1. Undo the nut (1a) and lift up the heater plugs control unit (1b) as much as necessary.
2. Disconnect the electrical connections (2a) and (2b) from the heater plugs control unit.
| Name | Connector | |
|---|---|---|
| 2a | Heater plugs controlunit | See M15A HEATER PLUGS CONTROLUNIT ( ENGINE ) |
| Name | Connector | |
|---|---|---|
| 2b | Heater plugs controlunit | See M15C HEATER PLUGS CONTROLUNIT ( SPARK PLUGS ) |
3. Undo the nut (3a) and disconnect supply lead (3b) from the heater plugs control unit.
| Name | Connector | |
|---|---|---|
| 3b | Heater plugs controlunit | See M15B HEATER PLUGS CONTROLUNIT ( ENGINE ) |
4. Remove the heater plugs control unit.
Refitting
Connect the supply lead to the heater plugs control unit and secure it using the nut.
Connect the electrical connections to the heater plugs control unit.
Place the heater plugs control unit back in its housing and secure it using the nut.
Connect the battery terminal (-).
Parts & tools for this job Staging For 2000 Fiat Doblò
- TOOLA/C manifold gauge setSearch: AC manifold gauge set
- TOOLUV leak detection kitSearch: AC UV leak detection kit
- PARTCabin filterSearch: Fiat Doblò 2000 cabin filter
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.