Tunnel trim - r r
- Make
- Fiat
- Model
- Doblò Factory Service Manual
- Year
- 2000–2010
- Section
- Bodyshell interior trims and fittings › Tunnel trim - r r
Tunnel trim - r r
Removing
Disconnect the battery negative terminal.
1. Undo the bolts (1a) and remove the tunnel cover (1b).
Refitting
Fit the tunnel cover and secure it using the bolts.
Connect the battery negative terminal.
Removing
Op. 7065A14 ANCHORAGE ROD FOR, (ONE), FRONT SEAT BELT LEFT OR RIGHT - R.R.
Op. 7040A60 UNDERDASHBOARD TRIM - R.R.
Move the two front seats forwards and pull the handbrake lever.
1. Remove the coin holder (1a) and the protective cap (1b) behind the handbrake lever.
2. Undo the fixing bolts (2a) and remove the tunnel cover (2b).
Refitting
Fit the tunnel cover and secure it using the fixing bolts.
Fit the coin holder and the protective cap behind the handbrake lever.
Return the front seats to their original position and release the handbrake lever.
Op. 7040A60 UNDERDASHBOARD TRIM - R.R.
Op. 7065A14 ANCHORAGE ROD FOR, (ONE), FRONT SEAT BELT LEFT OR RIGHT - R.R.
Parts & tools for this job Staging For 2000 Fiat Doblò
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Fiat touch up paint
- PARTPanel clip assortmentSearch: Fiat panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.