Exhaust rigid mount - r r

Make

Alfa Romeo

Model

GT Factory Service Manual

Year

2003–2010

Section

Exhaust pipes and silencers › Exhaust rigid mount - r r

EngineExhaust rigid mount - r r

EXHAUST RIGID MOUNT - R R

Operation 1076A32 · EXHAUST PIPE FASTENINGS AND PROTECTIONS

2.0 JTS

Removing

Position the vehicle on the ramp

Proceed with removal

Op. 7055B54 UNDER-ENGINE GUARD - R R

Proceed with removal

1. Undo the bolt (1a), nut (1b) and remove the exhaust pipe rigid mounting (1c).

Op. 1076B18 RIGID SECTION OF EXHAUST PIPE BETWEEN CATALYTIC CONVERTER AND SILENCER - R + R

Refitting

1. Fit the rigid mount of exhaust pipe (1a) and secure by tightening bolt (1b) and nut (1c) to the specified torque.

	Fastening	Component	Ø	Value (daNm)
1b	Bolt	EXHAUST PIPE RIGID MOUNT	M8	2.3 ÷ 2.8

	Fastening	Component	Ø	Value (daNm)
1c	Nut	EXHAUST PIPE RIGID MOUNT	M8

Proceed with refitting

Op. 1076B18 RIGID SECTION OF EXHAUST PIPE BETWEEN CATALYTIC CONVERTER AND SILENCER - R + R.

Proceed with refitting

Op. 7055B54 UNDER-ENGINE GUARD - R R.

Remove the car from the ramps.

08 Engine