EXHAUST PIPE HEAT SHIELD - R R

Operation 1076A40 · EXHAUST PIPE FASTENINGS AND PROTECTIONS

1.9 JTD 16V

Removing

Position the vehicle on a lift.

Proceed with the removal

Op. 1076B18 RIGID SECTION OF EXHAUST PIPE BETWEEN CATALYTIC CONVERTER AND SILENCER - R + R.

1. Remove the rear exhaust silencer by releasing from the flexible mounts.

1. Undo units (1a), bolt (1b) and remove the front exhaust pipe heat shield (1c).

1. Release the handbrake cable from the bracket.

2. Release from fastenings (2a) and remove the intermdiate heat shield from exhaust pipe (2b).

1. Undo retaining clips (1a) and remove the rear heat shield (1b) from the exhaust pipe.

Refitting

Place the exhaust pipe rear heat shield back in its housing and secure it using the clips.

Refit the intermediate exhaust pipe heat shield and secure.

Secure the handbrake cable to the bracket.

Place the exhaust pipe front heat shield back in its housing and secure it using the bolt and the nuts.

Replace the rear exhaust silencer in its housing and secure to the flexible mounts.

Proceed with the refitting

Op. 1076B18 RIGID SECTION OF EXHAUST PIPE BETWEEN CATALYTIC CONVERTER AND SILENCER - R + R.

Remove the vehicle from the lift.

1.8 T.SPARK

Removing

Position the vehicle on a lift.

Proceed with the removal

Op. 1076B24 INTERMEDIATE EXHAUST SILENCER - R + R.

1. Remove the rear exhaust silencer by releasing from the flexible mounts.

1. Undo units (1a), bolt (1b) and remove the front exhaust pipe heat shield (1c).

1. Release the handbrake cable from the bracket.

2. Remove retaining clips (2a) and remove intermediate heat shield (2b).

1. Remove retaining clips (1a) and remove rear heat shield (1b).

Refitting

Place the rear heat shield in its housing and secure it using the retaining clips.

Place the intermediate heat shield in its housing and secure it using the retaining clips.

Secure the handbrake cable to the bracket.

Place the exhaust pipe front heat shield back in its housing and secure it using the bolt and the nuts.

Replace the rear exhaust silencer in its housing and secure to the flexible mounts.

Proceed with the refitting

Op. 1076B24 INTERMEDIATE EXHAUST SILENCER - R + R.

Remove the vehicle from the lift.