Engine oil temperature sender unit - r + r
- Make
- Alfa Romeo
- Model
- GT Factory Service Manual
- Year
- 2003–2010
- Section
- Engine lubrication system › Engine oil temperature sender unit - r + r
ENGINE OIL TEMPERATURE SENDER UNIT - R + R
Removing
Position the vehicle on the ramp
Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).
| Name | Connector | |
|---|---|---|
| Battery | See A1B BATTERY ( BATTERY NEGATIVE ) |
Proceed with removal
Op. 4450B04 RIGHT FRONT WHEEL R R
Proceed with removal
1. Disconnect the electrical connection from the engine oil temperature sender unit.
Op. 7055B42 LH OR RH REFLECTOR(ONE) ON REAR BUMPERS - R R
2. Undo and remove the engine oil temperature sender unit.
Refitting
Place the engine oil temperature sender unit in its seating and tighten it to the recommended torque.
| Fastening | Component | Ø | Value (daNm) |
|---|
Connect the electrical connection to the engine oil temperature sender unit.
Proceed with refitting
Op. 7055B42 LH OR RH REFLECTOR(ONE) ON REAR BUMPERS - R R.
Proceed with refitting
Op. 4450B04 RIGHT FRONT WHEEL R R.
Connect the negative (-) battery terminal
Remove the car from the ramps.
Parts & tools for this job Staging For 2003 Alfa Romeo GT
- PARTEngine gasket setSearch: Alfa Romeo GT 2003 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.