Engine oil filler - r r
- Make
- Alfa Romeo
- Model
- GT Factory Service Manual
- Year
- 2003–2010
- Section
- Engine lubrication system › Engine oil filler - r r
ENGINE OIL FILLER - R R
Removing
Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).
| Name | Connector | |
|---|---|---|
| Battery | See A1B BATTERY ( BATTERY NEGATIVE ) |
Proceed with removal
- 1016A10 sound-proofing cover - r + r
1. Loosen the band and disconnect the engine oil vapour recovery pipe from the engine oil filler.
2. Disconnect the electrical connection from the engine coolant temperature sensor.
| Name | Connector | |
|---|---|---|
| 2 | Engine temperature sender unit | See K36 ENGINE TEMPERATURE SENDER UNIT ( CONNECTORS ) |
1. Undo the bolts (1a) and remove the engine oil filler (1b).
The bolts fixing the engine oil filler are treated with a compound to prevent them coming undone; therefore every time they are removed they must be replaced.
2. Remove the gasket.
Refitting
1. Place the engine oil filler (1a), complete with gasket (1b), back in its housing and secure it tightening the new bolts (1c) to the recommended torque.
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| 1c | Bolt | OIL FILTER FITTING | M6 | (Cylinder head side 08 10 |
Connect the electrical connection to the engine coolant temperature sensor.
Connect the oil vapour recovery pipe to the engine oil filler and tighten the band.
Proceed with refitting
- 1016A10 sound-proofing cover - r + r
Connect the negative (-) battery terminal
Parts & tools for this job Staging For 2003 Alfa Romeo GT
- PARTEngine gasket setSearch: Alfa Romeo GT 2003 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.