Front brake calliper bracket - r r
- Make
- Alfa Romeo
- Model
- GT Factory Service Manual
- Year
- 2003–2010
- Section
- Disc brakes › Front brake calliper bracket - r r
FRONT BRAKE CALLIPER BRACKET - R R
Removing
Position the vehicle on the ramp
Proceed with removal
Op. 4450B10 TYRE INFLATION VALVE CAP - REPLACE
1. Release the front brake caliper flexible pipe from the mounting bracket.
2. Remove the clip securing the brake caliper to the bracket.
3. Remove the protective plugs (3a), undo the bolts (3b) and move the front brake caliper (3c) complete with pads away from the bracket.
4. Undo the bolts (4a) and remove the front brake caliper bracket (4b).
Refitting
1. Place the front brake caliper bracket (1a) back in its housing and fix it tightening the bolts (1b) to the recommended torque.
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| 1b | Bolt | FRONT BRAKE CALIPER BRACKET | M12 | (Front steering knuckle side) 11.1 ÷ 12.3 |
2. Place the front brake caliper back in its housing (2a), fix it tightening the bolts (2b) to the recommended torque and fit the protective plugs (2c).
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| 2b | Bolt | FRONT BRAKE CALIPER ASSEMBLY | M12 | (Bracket side) 11.7 |
3. Refit in its seating the clip securing the brake caliper to the bracket.
4. Fit the front brake caliper flexible pipe to the mounting bracket.
Proceed with refitting
Op. 4450B10 TYRE INFLATION VALVE CAP - REPLACE.
Remove the car from the ramps.
Parts & tools for this job Staging For 2003 Alfa Romeo GT
- PARTBrake padsSearch: Alfa Romeo GT 2003 brake pads
- TOOLBrake bleeder kitSearch: one man brake bleeder kit
- FLUIDBrake fluidSearch: brake fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.