17 · Body & interior

Rear panel - r r

Make: Alfa Romeo
Model: GT Factory Service Manual
Year: 2003–2010
Section: Bodyshell interior trims and fittings › Rear panel - r r

‹ Prev Rear pillar trim - r r Next › Parcel rack

Body fittingsRear panel - r r

REAR PANEL - R R

Operation 7040H50 · ROOF PANEL LINING

Removing

Op. 7040L40 REAR COMPARTMENT SCUFF STRIP - R R

Op. 7050A22 REAR SEAT CUSHION - R+R

Op. 7040H80 PARCEL RACK

Op. 7040B10 LOAD PLATFORM (LUGGAGE PLATFORM) TRIM - R+R

Op. 7050A14 SPLIT REAR SEAT ASSEMBLY - R+R

1. Remove the perimetral seal on the door near the rear side piece area.

2. Remove the ashtray.

3. Undo the bolt.

4. Undo the side bolts fixing the rear panel.

5. Release the rear panel (5a) from the inner retainers (5b) using the special tool and pass the rear seat belt through the special notch (5c) in the side panel.

	Name	Country
5b	Scraper blade	1.823.015.000

6. Disconnect the electrical connection.

	Name	Connector
6	Rear left tweeter speaker	See P47 REAR LEFT TWEETER SPEAKER

	Name	Connector
6	Rear right tweeter speaker	See P48 REAR RIGHT TWEETER SPEAKER

7. Recover the rear side piece.

Refitting

Check that the rear side piece is not damaged.

Connect the electrical connection.

	Name	Connector
	Rear left tweeter speaker	See P47 REAR LEFT TWEETER SPEAKER

	Name	Connector
	Rear right tweeter speaker	See P48 REAR RIGHT TWEETER SPEAKER

Attach the rear panel to the inner retainers after having passed the rear seat belt branch through the special notch.

Tighten the side bolts and the middle bolt fixing the side panel.

Fit the ashtray.

Fit the perimetral seal on the door frame near the rear side piece.