POWER STEERING FLUID RESEVOIR - R.R.

Operation 4130B10 · POWER STEERING HYDRAULIC SYTEM

2.2 JTS, 2.4 JTD 20v

Removing

Op. 1048A28 VACUUM AIR CIRCUIT RESONATOR PIPE - R+R

- Draw off the power assisted steering fluid using a suitable syringe.

- Loosen the bands and remove the two pipes from the reservoir.

- Undo the nuts and remove the reservoir from the bracket.

Refitting

- Fit the reservoir in position and tighten the nuts.

- Place the two pipes in their housings and secure them using the bands.

Op. 1048A28 VACUUM AIR CIRCUIT RESONATOR PIPE - R+R

Op. 0010T71 POWER STEERING FLUID CHECK LEVEL AND TOP UP IF NECESSARY

Op. 0010T75 HYDRAULIC POWER STEERING SYSTEM BLEED AIR

3.2 JTS

Removing

- Draw off the power assisted steering fluid from the reservoir using a suitable syringe.

1. Loosen the bands and disconnect the two pipes from the power assisted steering fluid reservoir.

2. Undo the fixing nuts and remove the power assisted steering fluid reservoir.

Refitting

- Place the power assisted steering fluid reservoir back in its housing and secure it using the nuts.

- Connect the two pipes to the power assisted steering fluid reservoir and tighten the bands.

Op. 0010T71 POWER STEERING FLUID CHECK LEVEL AND TOP UP IF NECESSARY

Op. 0010T75 HYDRAULIC POWER STEERING SYSTEM BLEED AIR