Workshop Manuals Factory service & repair Alfa Romeo
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Transmission (4x4)12 Axles and driveshafts13 Brakes14 Steering15 Suspension and wheels16 Heating, air conditioning and auxiliary units17 Electrical equipment18 Body fittings19 Body panels and frame20 Wiring diagrams and electrical functions21 Wiring harnesses22 Connectors and pin-outs23 Fault diagnosis24 Special tools
Alfa Romeo Brera and Spider Factory Service Manual (2005-2010)23 · Fault diagnosis
23 · Diagnostics

Engine oil leaks

Make
Alfa Romeo
Model
Brera and Spider Factory Service Manual
Year
2005–2010
Section
Consumption /leaks/ wear › Engine oil leaks
Fault diagnosisEngine oil leaks

ENGINE OIL LEAKS

2.2 JTS, 3.2 JTS

An engine oil leak can be seen with consequent dripping and/or fouling of the engine

0PRELIMINARY CHECKSAll OKProblems encounteredOperation

Carry out an initial visual inspection to locate the component that is leaking or the area of the leak.

If the visual inspection was not enough, wash the engine, dry it and spread talc on the parts involved: carry out a road test to identify the leak.

Move on to Step 1Leak from the exhaust cap.Move on to Step 1.
Leak from the sump.Move on to Step 2.
Leak from the oil filter.Move on to Step 3.
Leak from the engine gaskets.Move on to Step 4.
1DRAIN PLUG CHECKAll OKProblems encounteredOperation
Check the condition and seal of the oil drain plug.Move on to Step 2Drain plug not intact.

Replace the drain plug

Op. 1020A30 ENGINE OIL DRAIN PLUG - REPLACE

Exhaust cap tightening not correct.Restore the correct exhaust cap tightening.
2OIL SUMP CHECKAll OKProblems encounteredOperation

Check:

- the condition of the oil sump;

- the seal of the sealant between the sump and cylinder block/crankcase;

- that the sump fixing bolts are correctly tightened.

Move on to Step 3Oil sump damaged or distorted.

Replace the sump

Op. 1020A20 CRANKCASE OIL SUMP - R.R CLEAN SURFACES FOR SEALANT APPLICATION

Incorrect tightening of retaining bolts.Restore the correct tightening of the retaining bolts.
3OIL FILTER CHECKAll OKProblems encounteredOperation

Check:

- the condition of the oil filter;

- the seal and condition of the seal;

- the condition of the water-oil heat exchanger

Move on to Step 4Oil filter damaged or distorted.Replace the oil filter and seal
Oil leaks from the heat exchanger.

Replace the heat exchanger

Op. 1084C10 ENGINE OIL HEAT EXCHANGER - R + R

4ENGINE GASKET CHECKAll OKProblems encounteredOperation
Access the crankshaft and camshaft oil seals. Check the seal of these gaskets.End of diagnosisCrankshaft seals damaged.Replace the seals concerned.
Camshaft seals damagedReplace the seals concerned.

Parts & tools for this job Staging For 2005 Alfa Romeo Brera

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.