ENGINE OIL HEAT EXCHANGER - R + R

Operation 1084C10 · ENGINE OIL COOLING CIRCUIT

2.2 JTS

Removing

- Position the vehicle on a lift.

Op. 5530B10 BATTERY - R+R

Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R

1. Undo the radiator coolant drain plug.

Collect the coolant in a suitable container.

1. Loosen the bands and disconnect the engine coolant inlet and outlet pipes, engine oil heat exchanger side.

2. Undo the bolts (2a) and remove the engine oil heat exchanger (2b).

Refitting

1. Place the engine oil heat exchanger (1a) in its housing and secure it using the bolts (1b).

2. Connect the engine coolant inlet and outlet pipes, engine oil heat exchanger side and tighten the bands.

- Tighten the coolant drain plug to the radiator.

Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R

Op. 5530B10 BATTERY - R+R

Op. 0010T20 ENGINE COOLANT - CHANGE

- Remove the vehicle from the lift.

3.2 JTS

Removing

Op. 0010T84 COOLANT FOR AIR CONDITIONING SYSTEM - DEHYDRATE AND REPRESSURIZE

Op. 0010T20 ENGINE COOLANT - CHANGE

Op. 1080B92 LEFT UPPER LAMBDA SENSOR - R.R.

Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.

Op. 1072C40 LEFT EXHAUST MANIFOLD HEAT SHIELD - R.R.

Op. 1084A16 OIL DIPSTICK PIPE - R.R

Op. 1072C30 LEFT EXHAUST MANIFOLD - R + R AND REPLACE GASKET

Op. 1084C15 ENGINE OIL HEAT EXCHANGE MOUNT R R

Refitting

Op. 1084C15 ENGINE OIL HEAT EXCHANGE MOUNT R R

Op. 1072C30 LEFT EXHAUST MANIFOLD - R + R AND REPLACE GASKET

Op. 1084A16 OIL DIPSTICK PIPE - R.R

Op. 1072C40 LEFT EXHAUST MANIFOLD HEAT SHIELD - R.R.

Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.

Op. 1080B92 LEFT UPPER LAMBDA SENSOR - R.R.

Op. 0010T20 ENGINE COOLANT - CHANGE

Op. 0010T84 COOLANT FOR AIR CONDITIONING SYSTEM - DEHYDRATE AND REPRESSURIZE