Coolant temperature senso r r
- Make
- Alfa Romeo
- Model
- Brera and Spider Factory Service Manual
- Year
- 2005–2010
- Section
- Petrol injection system › Coolant temperature senso r r
COOLANT TEMPERATURE SENSO R R
Removing
- Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).
1. Disconnect the electrical connection from the engine coolant temperature sensor.
2. Undo the engine coolant temperature sensor and remove it.
Refitting
- Place the engine coolant temperature sensor in its housing and tighten it to the recommended torque.
Replace the seal.
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Engine coolant temperature sensor | M12 | (thermostat unit side) 2.2 | 1.9 JTS 2.2 JTS 3.2 JTS |
- Connect the electrical connection to the engine coolant temperature sensor.
- Connect the negative battery terminal.
Removing
Op. 1016A10 SOUND-PROOFING COVER - R.R
1. Disconnect the electrical connection for the engine coolant temperature sensor.
| Description | Connector | |
|---|---|---|
| 1 | Engine coolant temperature sensor/sender unit | See K036 ENGINE COOLANT TEMPERATURE SENSOR/SENDER UNIT |
2. Undo the engine coolant temperature sensor from the left cylinder head and remove it.
Refitting
- Place the engine coolant temperature sensor in its housing on the left cylinder head and tighten it to the recommended torque.
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Engine coolant temperature sensor | M12 | 2.2 |
- Connect the engine coolant temperature sensor electrical connection.
Parts & tools for this job Staging For 2005 Alfa Romeo Brera
- FLUIDCoolantSearch: Alfa Romeo coolant antifreeze
- PARTThermostatSearch: Alfa Romeo Brera 2005 thermostat
- TOOLCooling system pressure testerSearch: cooling system pressure tester
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.