Cam angle sensor r r
- Make
- Alfa Romeo
- Model
- Brera and Spider Factory Service Manual
- Year
- 2005–2010
- Section
- Petrol injection system › Cam angle sensor r r
EngineCam angle sensor r r
CAM ANGLE SENSOR R R
Removing
The procedure for the intake side sensor is described below, the operations for the exhaust side sensor are the same.
- Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).
1. Disconnect the electrical connection for the cam angle sensor.
| Description | Connector | |
|---|---|---|
| 1 | Inlet side timing sensor | See K106 INTAKE SIDE TIMING SENSOR |
2. Undo the bolts (2a) and remove the cam angle sensor (2b).
Refitting
- Position the cam angle sensor in its housing and secure it using the bolt.
- Connect the electrical connection for the cam angle sensor.
- Connect the negative battery terminal.
Parts & tools for this job Staging For 2005 Alfa Romeo Brera
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.