UPPER RADIATOR COOLANT OUTLET HOSE - R.R.

Operation 1088D14 · COOLANT PIPES AND HOSES

2.2 JTS

Removing

Op. 0010T20 ENGINE COOLANT - CHANGE

1. Disconnect the rapid connector for the radiator coolant outlet hose.

1. Lower the vehicle, loosen the band and disconnect the hose from the rigid pipe.

Refitting

- Connect the hose to the rigid coolant pipe and secure it using the band.

- Raise the vehicle and connect the rapid connector for the coolant hose to the lower radiator mounting.

Op. 0010T20 ENGINE COOLANT - CHANGE

3.2 JTS

Removing

Op. 0010T20 ENGINE COOLANT - CHANGE

1. Disconnect the rapid connector and then the radiator coolant inlet hose, radiator side.

1. Loosen the band and disconnect the radiator coolant inlet hose, three-way connector side and remove it.

- If necessary, loosen the band and remove the connector with the rapid connector.

Refitting

- Place the connector with the rapid connector in position and secure the band.

- Place the radiator coolant inlet hose in position, three-way connector side and fasten the band.

- Connect the radiator coolant inlet hose, radiator side and the rapid connector.

Op. 0010T20 ENGINE COOLANT - CHANGE

2.4 JTD 20v

Removing