Workshop Manuals Factory service & repair Alfa Romeo
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Transmission (4x4)12 Axles and driveshafts13 Brakes14 Steering15 Suspension and wheels16 Heating, air conditioning and auxiliary units17 Electrical equipment18 Body fittings19 Body panels and frame20 Wiring diagrams and electrical functions21 Wiring harnesses22 Connectors and pin-outs23 Fault diagnosis24 Special tools
Alfa Romeo 159 Factory Service Manual (2005-2011)20 · Wiring diagrams and electrical functions
20 · Electrical

Sun roof - description

Make
Alfa Romeo
Model
159 Factory Service Manual
Year
2005–2011
Section
Electrically activated devices › Sun roof - description
Wiring diagrams and electrical functionsSun roof - description

SUN ROOF - DESCRIPTION

Powered sunroof

DESCRIPTION

The sun-roof provides a means of extra passenger compartment ventilation and ensures swift air exchange when necessary for improved passenger comfort.

The system is operated by a knob near the front courtesy light.

The roof operating strategy is controlled by a special control unit that receives signals from the control knob and the roof operating motor.

When the control knob is turned in the direction shown by the arrow, the roof slides open: a choice of 5 opening positions is available; return the knob to the central position to close the roof.

The sun-roof is equipped with a blind underneath that slides manually but is pushed along by the roof when it opens. The blind emerges slightly when the roof is closed to provide access to the manoeuvring handle.

When the control handle is turned the opposite way to the direction shown by the arrow, the roof swivels up at the rear: a choice of 3 opening positions is available; return the knob to the central position to close the roof.

Press the knob to interrupt all movement (inhibition position).

The electronic roof control circuit also includes an antipinch function: whilst the roof is being closed, themovement is interrupted and reversed by about 10 cm if an obstacle is dtected by a Hall effect sensor located on the motor. This function can be excluded for safety reasons by pressing the knob as described above.

The sun roof is also automatically opened through the special prolonged (more than 2 seconds) command sent by the TEG remote control button.

The sun roof is also automatically closed - if left open - through the special prolonged (more than 2 seconds) command sent by the TEG remote control button.

The circuit is controlled by the services relay and protected by a specific fuse, both located in the junction unit under the dashboard: there is a power supply both with the TEG inserted (ON) and not inserted (OFF) during the starting stage this relay is temporarily deactivated whilst with the TEG not inserted (OFF) the Body Computer keeps the relay activated for 3 minutes but deactivates it 30 seconds after one of the doors is opened.

Parts & tools for this job Staging For 2005 Alfa Romeo 159

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.