Workshop Manuals Factory service & repair Alfa Romeo
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Transmission (4x4)12 Axles and driveshafts13 Brakes14 Steering15 Suspension and wheels16 Heating, air conditioning and auxiliary units17 Electrical equipment18 Body fittings19 Body panels and frame20 Wiring diagrams and electrical functions21 Wiring harnesses22 Connectors and pin-outs23 Fault diagnosis24 Special tools
Alfa Romeo 159 Factory Service Manual (2005-2011)23 · Fault diagnosis
23 · Diagnostics

Steering hard / (in one direction only)

Make
Alfa Romeo
Model
159 Factory Service Manual
Year
2005–2011
Section
Steering – vehicle behaviour › Steering hard / (in one direction only)
Fault diagnosisSteering hard / (in one direction only)

STEERING HARD / (IN ONE DIRECTION ONLY)

When the steering is operated normally there is a hardening of the steering action to the right or the left

0PRELIMINARY CHECKSALL OKPROBLEMS ENCOUNTEREDACTION

Carry out a test steering fully in various conditions to check the actual onset of the hardening in one direction only.

Visually inspect the power assisted steering fluid level in the reservoir.

Move on to Step 11. Hardening in both directions

1. Proceed as instructed in the

See table H010 STEERING HARD / (STEERING IN BOTH DIRECTIONS)

2. Power assisted steering fluid level too low.

2. Top up to the correct level, if there are leaks, continue as instructed in the

See table X030 POWER ASSISTED STEERING SYSTEM FLUID LEAKS

1STEERING RODS AND ARMS CHECKALL OKPROBLEMS ENCOUNTEREDACTION
Check the condition of the steering rods and armsMove on to Step 21. Rods damaged or worn.

1. Replace the rods

Op. 4110B10 STEERING LINKS - R+R ON VEHICLE - CHECK TOE-IN/TOE-OUT SEPARATELY

2. Arms damaged or worn.

2. Replace the steering box

Op. 4120A10

2RACK AND PINION CLEARANCE CHECKALL OKPROBLEMS ENCOUNTEREDACTION
Check the rack and pinion clearance with the steering column detached and the wheels straight.Move on to Step 3Rack and pinion clearance too large.

Replace the steering box

Op. 4120A10

3CHECK ON CORRECT TENSION OF DRIVE BELT AND CORRECT OPERATION OF POWER ASSISTED STEERING PUMPALL OKPROBLEMS ENCOUNTEREDACTION

Check that the tension of the power assisted steering pump drive belt is correct and that it is not worn.

Also check that the power assisted steering pump is working properly.

Move on to Step 41. Belt not correctly tensioned.

1. Restore correct belt tension

Op. 1092C12

2. Belt worn.

2. Replace the belt

Op. 1092C11

3. Power assisted steering pump malfunction.

3. Replace the power assisted steering pump

Op. 4130B24

4STEERING WHEEL RETURN CHECKALL OKPROBLEMS ENCOUNTEREDACTION

Refit all the components removed.

Test the vehicle and check that the steering wheel returns correctly.

End of diagnosisPoor steering wheel return.

Restore the correct front wheel geometry

Op. 4450A10 FRONT WHEEL GEOMETRY - CHECK USING OPTICAL EQUIPMENT - INCLUDES ADJUSTMENT IF NECESSARY

Parts & tools for this job Staging For 2005 Alfa Romeo 159

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.