Workshop Manuals Factory service & repair Alfa Romeo
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Transmission (4x4)12 Axles and driveshafts13 Brakes14 Steering15 Suspension and wheels16 Heating, air conditioning and auxiliary units17 Electrical equipment18 Body fittings19 Body panels and frame20 Wiring diagrams and electrical functions21 Wiring harnesses22 Connectors and pin-outs23 Fault diagnosis24 Special tools
Alfa Romeo 159 Factory Service Manual (2005-2011)23 · Fault diagnosis
23 · Diagnostics

Front seat lumbar adjustment not working

Make
Alfa Romeo
Model
159 Factory Service Manual
Year
2005–2011
Section
Seats › Front seat lumbar adjustment not working
Fault diagnosisFront seat lumbar adjustment not working

FRONT SEAT LUMBAR ADJUSTMENT NOT WORKING

Not working or not working properly

0PRELIMINARY CHECKSALL OKPROBLEMS ENCOUNTEREDACTION
Check the condition of the adjustment leverMove on to Step 1Adjustment lever broken/distorted

Replace the adjustment lever

Op. 7045A25 FRONT SEAT BACKREST LUMBAR ADJUSTMENT KNOB (ONE), LEFT OR RIGHT - R.R.

1CHECK ON CORRECT ATTACHMENT OF PULLMAFLEX PLATEALL OKPROBLEMS ENCOUNTEREDACTION
Check that the pullmaflex plate is correctly attached to the frame.Move on to Step 2Pullmaflex plate partly attached.Attach the Pullmaflex plate correctly (check the condition of the female screws).
2CHECK ON CORRECT ATTACHMENT OF REGULATOR CABLESALL OKPROBLEMS ENCOUNTEREDACTION
Check that the regulator cables are correctly attached to the pullmaflex plate.Move on to Step 31. Cable detached from plate1. Attach the cable in the special housing.
2. Cable broken

2. Replace the lumbar adjustment assembly

Op. 7045A39 DEVICE FOR DRIVER'S SEAT BACKREST LUMBAR ADJUSTMENT - R.R.

3CHECK ON REGULATOR CASING SEALALL OKPROBLEMS ENCOUNTEREDACTION
Check the regulator casing seal and make sure there is no slackness.Move on to Step 4Bolts securing regulator casing to frame not correctly tightened.Tighten the fixing bolt correctly or replace it.
4CHECK ON REGULATOR ASSEMBLYALL OKPROBLEMS ENCOUNTEREDACTION
Check the condition of the lumbar regulator assembly.End of diagnosisComponents broken/distorted

Replace the lumbar adjustment assembly

Op. 7045A39 DEVICE FOR DRIVER'S SEAT BACKREST LUMBAR ADJUSTMENT - R.R.

Parts & tools for this job Staging For 2005 Alfa Romeo 159

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.