Workshop Manuals Factory service & repair Alfa Romeo
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Transmission (4x4)12 Axles and driveshafts13 Brakes14 Steering15 Suspension and wheels16 Heating, air conditioning and auxiliary units17 Electrical equipment18 Body fittings19 Body panels and frame20 Wiring diagrams and electrical functions21 Wiring harnesses22 Connectors and pin-outs23 Fault diagnosis24 Special tools
Alfa Romeo 159 Factory Service Manual (2005-2011)23 · Fault diagnosis
23 · Diagnostics

Front suspension noise (whistling/humming)

Make
Alfa Romeo
Model
159 Factory Service Manual
Year
2005–2011
Section
Noise / vibrations › Front suspension noise (whistling/humming)
Fault diagnosisFront suspension noise (whistling/humming)

FRONT SUSPENSION NOISE (WHISTLING/HUMMING)

Whilst driving, especially on unmade roads, there is a whistling noise coming from the front suspension. This diagnosis can only be made after

See table

Carry out the latter first.

If the problem is only on one side, carry out the checks and any operations on the appropriate side only.

0PRELIMINARY CHECKSAll OKProblems encounteredOperation

Having carried out the road test, during the

See table

, there was a whistling noise from the front.

Continue depending on the circumstances in which the noise occurs.

End of diagnosis

The noise increases when cornering.

  • The noise increases when cornering
  • The noise increases in vertical oscillation conditions

Replace the wheel bearing complete with hub on the side where the noise is loudest

Op. 4450C32 ONE FRONT WHEEL HUB BEARING, LH OR RH - REPLACE

This bearing is used by the ABS active sensors to calculate the wheel speed. It should NEVER come into contact with metal shavings because they could alter the gap and prevent a correct reading from the sensor.

  • Replace the wheel bearing on the side where the noise is loudest.
  • Move on to Step 1
The noise increases in vertical oscillation conditions.Move on to Step 1.
1BRAKE DISC CHECKAll OKProblems encounteredOperation
Check that the gap between the brake disc and the steel shield is sufficient.Move on to Step 2Gap too smallRestore the correct gap
2SHOCK ABSORBER STEM CHECKAll OKProblems encounteredOperation

Remove the wheel

Op. 4450B12 FRONT WHEELS (TWO) - R+R

Check that the noise is not due to irregular friction between the shock absorber stem and the gasket, checking the condition of the stem chrome surface.

End of diagnosisThere is irregular friction

Lubricate the stem raising the dust cover with a layer of silicon grease.

If the noise persists, replace the shock absorber

Op. 4410A12 FRONT SUSPENSION DAMPER (ONE), LH OR RH - FOR MCPHERSON STRUT SYSTEM - INCLUDES DISMANTLING/REASSEMBLY OF ASSEMBLY AT BENCH - R.R

Parts & tools for this job Staging For 2005 Alfa Romeo 159

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.