Workshop Manuals Factory service & repair Alfa Romeo
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Transmission (4x4)12 Axles and driveshafts13 Brakes14 Steering15 Suspension and wheels16 Heating, air conditioning and auxiliary units17 Electrical equipment18 Body fittings19 Body panels and frame20 Wiring diagrams and electrical functions21 Wiring harnesses22 Connectors and pin-outs23 Fault diagnosis24 Special tools
Alfa Romeo 159 Factory Service Manual (2005-2011)23 · Fault diagnosis
23 · Diagnostics

Tyre wear

Make
Alfa Romeo
Model
159 Factory Service Manual
Year
2005–2011
Section
Consumption /leaks/ wear › Tyre wear
Fault diagnosisTyre wear

TYRE WEAR

1CHECK TYRE WEARAll OKProblems encounteredOperation

Check the tyre wear status.

More specifically:

- wear on outer edge;

- wear on inner edge;

- wear on tyre shoulder;

- tread wear

Move on to Step 4Uniform wear on both sides: inflation pressure lowMake sure tyres are inflated to the correct pressure. If necessary, replace the tyres.
Step wear on one side (outer or inner)Move on to Step 2
Wear on outer edge: exterior smoothMove on to Step 2
Tyre shoulder wearThe problem is due to the customer''s over-sporty driving style: If necessary, replace the tyres.
Central tread wear: inflation pressure excessiveMake sure tyres are inflated to the correct pressure. If necessary, replace the tyres.
Uniform wear on tread surface: compound qualityReplace the tyres.
Tread wear.Replace the tyres.
2CHECK FRONT WHEEL GEOMETRYAll OKProblems encounteredOperation
Check the front wheel geometryMove on to Step 3Front wheel geometry not correct

Restore correct geometry

Op. 4450A10 FRONT WHEEL GEOMETRY - CHECK USING OPTICAL EQUIPMENT - INCLUDES ADJUSTMENT IF NECESSARY

if necessary, replace the front tyres.

3REAR WHEEL GEOMETRYAll OKProblems encounteredOperation
Check the rear wheel geometryMove on to Step 4Rear wheel geometry not correct

Restore correct geometry

Op. 4450A40 REAR WHEEL GEOMETRY - CHECK USING OPTICAL EQUIPMENT, INCLUDES ADJUSTMENT IF NECESSARY

if necessary, replace the rear tyres.

4SHOCK ABSORBER EFFICIENCY CHECKAll OKProblems encounteredOperation
Check the efficiency of the shock absorbers.End of diagnosisFront shock absorbers inefficient.

Replace the shock absorbers

Op. 4410A12 FRONT SUSPENSION DAMPER (ONE), LH OR RH - FOR MCPHERSON STRUT SYSTEM - INCLUDES DISMANTLING/REASSEMBLY OF ASSEMBLY AT BENCH - R.R

If necessary, replace the front tyres.

Rear shock absorbers inefficient.

Replace the shock absorbers

Op. 4420A12 REAR SUSPENSION DAMPER (ONE), LH OR RH - FOR MCPHERSON STRUT SYSTEM - INCLUDES DISMENTLING/REBUILDING OF ASSEMBLY AT BENCH R R

If necessary, replace the rear tyres.

Parts & tools for this job Staging For 2005 Alfa Romeo 159

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.