VACUUM RESEVOIR - R.R

Operation 1060G70 · DIESEL INJECTION PRESSURE PUMP ELECTRONIC CONTROL

1.9 JTD 8V, 1.9 JTD 16V, 2.4 JTD 20V

Removing

Op. 1016A10 SOUND-PROOFING COVER - R.R

Op. 5530B10 BATTERY - R+R

1. Loosen the band and disconnect the engine oil vapour recovery pipe from the engine oil vapour separator.

2. Undo nuts securing the vacuum tank.

1. Disconnect the brake servo vacuum pipe rapid connector.

2. Open the clip and move the brake servo vacuum pipe to one side.

1. Undo the nut securing the duplex pipes to the thermostat.

1. Undo the nuts securing the duplex pipes to the starter motor and move them away.

- Disconnect the vacuum pipes from the vacuum tank and remove.

Refitting

- Place the vacuum tank back in its housing and secure it using the nuts.

- Connect the vacuum pipes to the vacuum tank.

- Connect the pipe to the oil vapour separator and secure it using the band.

- Place the duplex pipes back in their housing and secure them to the starter motor and thermostat with the nuts.

- Connect the rapid connector for the vacuum pump pipe and secure it with the retaining clips.

Op. 5530B10 BATTERY - R+R

Op. 1016A10 SOUND-PROOFING COVER - R.R