SWITCH ON BRAKE PEDAL - R.R (DIESEL ENGINES)

Operation 1060D38 · ELECTRONIC DIESEL INJECTION PUMP CONTROL

1.9 JTD 8V, 1.9 JTD 16V, 2.4 JTD 20V

Removing

1. Disconnect the electrical connection.

2. Rotate the switch on the brake pedal (2a) through about 90° in an anti-clockwise and extract it from the mounting (2b).

Refitting

- Check that the switch is not damaged.

- Gently lower the brake pedal and fit the switch in place, then rotate it through about 90° in a clockwise direction until it is locked.

- Connect the electrical connection.

- Check that the brake lights are working.