Pressure relief sensor - r.r.
- Make
- Alfa Romeo
- Model
- 159 Factory Service Manual
- Year
- 2005–2011
- Section
- Diesel injection system › Pressure relief sensor - r.r.
EnginePressure relief sensor - r.r.
PRESSURE RELIEF SENSOR - R.R.
Removing
- Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).
| Description | Connector | |
|---|---|---|
| Battery | See A001 BATTERY |
Op. 1016A10 SOUND-PROOFING COVER - R.R
1. Disconnect the electrical connection for the pressure relief sensor.
| Description | Connector | |
|---|---|---|
| 1 | Supercharging sensor | See K082 SUPERCHARGING SENSOR |
2. Undo bolts (2a) and remove the pressure relief sensor (2b).
Refitting
1. Position the excess pressure sensor (1a) in its housing and secure it tightening the bolt (1b) to the recommended torque.
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Excess pressure sensor | Bolt | M | 0.9 | 1.9 JTD 8V 1.9 JTD 16V 2.4 JTD 20V |
2. Connect the electrical connection for the pressure relief sensor.
Op. 1016A10 SOUND-PROOFING COVER - R.R
- Connect the negative battery terminal.
Parts & tools for this job Staging For 2005 Alfa Romeo 159
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.