AIR FLOW METER - R.R.

Operation 1060G10 · DIESEL INJECTION PRESSURE PUMP ELECTRONIC CONTROL

1.9 JTD 8V, 1.9 JTD 16V

Removing

If the air flow meter is replaced, reset using an examiner after refitting.

- Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).

Op. 1016A10 SOUND-PROOFING COVER - R.R

1. Disconnect the electrical connection from the air flow meter.

2. Loosen collars (2a) and disconnect air sleeve (2b) from the air flow meter and resonator.

3. Loosen the band (3a) and remove the air flow meter (3b).

Refitting

- Place the air flow meter back in its housing and secure it using the band.

- Connect the air sleeve to the air flow meter and resonator and tighten the bands.

- Connect the electrical connection to the air flow meter.

Op. 1016A10 SOUND-PROOFING COVER - R.R

- Connect the negative battery terminal.

2.4 JTD 20V

Removing

If the air flow meter is being replaced, when the refitting is complete the following operations must be carried out using the Examiner.

- Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).

Op. 1048A41 HOSE FROM FLOW METER TO TURBOCHARGER - R.R.

1. Disconnect the electrical connection from the air flow meter.

2. Loosen the band (2a) and remove the air flow meter (2b).

Refitting

- Place the air flow meter back in its housing and secure it using the band.

- Connect the electrical connection to the air flow meter.

Op. 1048A41 HOSE FROM FLOW METER TO TURBOCHARGER - R.R.

- Connect the negative battery terminal.