Flywheel side knock sensor - r+r
- Make
- Alfa Romeo
- Model
- 159 Factory Service Manual
- Year
- 2005–2011
- Section
- Engine ignition › Flywheel side knock sensor - r+r
Electrical equipmentFlywheel side knock sensor - r+r
FLYWHEEL SIDE KNOCK SENSOR - R+R
Removing
- Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).
| Description | Connector | |
|---|---|---|
| Battery | See A001 BATTERY |
1. Disconnect the electrical connection (1a), undo the bolts (1b) and remove the detonation sensor (1c).
| Description | Connector | |
|---|---|---|
| 1a | Battery | See K050 DETONATION SENSOR |
Refitting
- Position the detonation sensor in its housing and tighten the bolt to the recommended torque.
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Detonation sensor | Bolt | M10 | 1.6 ÷ 2.0 | 1.9 JTS 2.2 JTS |
- Connect the electrical connection to the knock sensor.
Parts & tools for this job Staging For 2005 Alfa Romeo 159
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.