HANDBRAKE CABLE - R+R

Operation 3380A30 · HANDBRAKE CONTROL AND LINKAGE

Removing

- Position the vehicle on a lift.

Op. 7045A10 FRONT SEAT (ONE), LEFT OR RIGHT - R.R.

(left and right).

Op. 7040L71 BOX ON TUNNEL REAR COATING - R R

Op. 5010C32 AIR VENT ON TUNNEL COVER FOR REAR SEATS - R.R.

Op. 7040L37 GEAR LEVER TRIM - R.R

Op. 3380A44 HANDBRAKE/LINKAGE PROTECTION - R+R

Op. 7040L20 TUNNEL COVER - R.R

1. Loosen the nut tensioning the handbrake cables.

2. Disconnect the cables from the handbrake lever.

1. Unscrew nuts (1a) and remove brackets (1b) securing the handbrake cables to the body.

1. Unscrew nuts (1a) and remove brackets (1b) securing the handbrake cables to the underbody.

1. Disconnect the handbrake control cable from the rear brake calipers.

1. Remove the handbrake cables by withdrawing together with the bulkhead coupling seal.

Refitting

- Refit the handbrake cables by passing through the bulkhead coupling passage and positioning the seal.

- Connect the handbrake control cable to the rear brake calipers.

- Refit the brackets securing the handbrake cables to the underbody and secure with bolts.

- Refit the brackets securing the handbrake cables to the body and secure with nuts.

- Connect the cables to the handbrake lever.

Op. 7040L20 TUNNEL COVER - R.R

Op. 3380A44 HANDBRAKE/LINKAGE PROTECTION - R+R

Op. 7040L37 GEAR LEVER TRIM - R.R

Op. 5010C32 AIR VENT ON TUNNEL COVER FOR REAR SEATS - R.R.

Op. 7040L71 BOX ON TUNNEL REAR COATING - R R

Op. 7045A10 FRONT SEAT (ONE), LEFT OR RIGHT - R.R.

(left and right).

Op. 3380A04 HANDBRAKE - ADJUST TRAVEL

- Remove the vehicle from the lift.