Follow me home function is not activated
- Make
- Lancia
- Model
- Ypsilon Factory Service Manual
- Year
- 2003–2011
- Section
- Lights › Follow me home function is not activated
Fault diagnosisFollow me home function is not activated
FOLLOW ME HOME FUNCTION IS NOT ACTIVATED
Follow me home function will not activate Low and high beams work properly;
The follow me home function must be activated by the user within two minutes of key off by operating light flasher stalk control
If the user maintains the light flasher stalk in flashing position for longer than two seconds, the follow me home function is deactivated.
| Results of the tests | ||||
| 0 | PRELIMINARY CHECKS | All OK | Problems met | Operation |
|---|---|---|---|---|
| With the ignition in the ON position, check that the headlamp flasher is working properly. | Continue to Step 2 | The flasher is not working. | Continue to Step 1 | |
| 1 | CHECKING OPERATION OF THE STEERING COLUMN SWITCH UNIT | All OK | Problems met | Operation |
| Check the condition of the 'Follow me home' function circuit (steering column switch unit headlamp flasher). See E2012 MAIN BEAM HEADLAMPS | Continue to Step 2 | Circuit damaged | Replace the steering column switch unit | |
| 2 | CHECKING WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
Connect the Examiner to the diagnostic socket Check:
| End of diagnosis | Fault persists | Replace the Body Computer | |
Parts & tools for this job Staging For 2003 Lancia Ypsilon
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Lancia Ypsilon
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.