I.e. failure warning light on
- Make
- Lancia
- Model
- Ypsilon Factory Service Manual
- Year
- 2003–2011
- Section
- Instrument panel › I.e. failure warning light on
Fault diagnosisI.e. failure warning light on
I.E. FAILURE WARNING LIGHT ON
The engine management control unit warning light remains on. The CODE warning light comes on and goes out.
The CODE warning light going out means that the dialogue between the two control units has gone well.
| Results of the tests | ||||
| 1 | CHECK WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
|---|---|---|---|---|
Connect the diagnostic equipment (Examiner or other instruments) to the diagnostic socket. Check that there are no errors in the control unit | Continue to Step 2 | An error is detected in the control unit | Continue according to the instructions for the diagnostic equipment | |
| 2 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | End of diagnosis | Fault persists | Continue as instructed See table B10 ENGINE DOES NOT START | |
Parts & tools for this job Staging For 2003 Lancia Ypsilon
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Lancia Ypsilon
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.