Hydraulic tappets all r r

Operation 1036H57 · Tappets and rocker shafts

1.3 JTD

Removing

Position the vehicle on the ramp.

Drain the air conditioner coolant circuit - 0010T84 coolant for air conditioning system dehydrate and recharge.

Proceed with removal - 4450B04 right front wheel r r.

Proceed with removal.

Proceed with removal - 7055B66 Engine compartment DUST SHIELD protection in right front wheel arch - R.R..

Proceed with removal - 7055B91 Right front WHEEL ARCH LINER - R.R..

Proceed with removal - 5530B10 battery - r+r.

Proceed with removal - 5530B52 Battery DRIP TRAY/SUPPORT - R.R..

Proceed with removal - 1060G90 diesel injection wiring harness - r r.

Proceed with removal - 1016B10 single cylinder head extension - change gasket.

1. Remove the valve rocker arms.

2. Remove the hydraulic tappets.

Refitting

Lubricate with engine oil and refit the hydraulic tappets in their seatings.

Position the hydraulic tappets with the oil passage hole facing towards the outside of the bottom cylinder head: this position puts this hole in communication with the oil channel present in the bottom cylinder head.

Place the valve rocker arms back in their housings.

Proceed with refitting - 1016B10 single cylinder head extension - change gasket.

Proceed with refitting - 1060G90 diesel injection wiring harness - r r.

Proceed with refitting - 5530B52 Battery DRIP TRAY/SUPPORT - R.R..

Proceed with refitting - 5530B10 battery - r+r.

Proceed with refitting - 7055B91 Right front WHEEL ARCH LINER - R.R..

Proceed with refitting - 7055B66 Engine compartment DUST SHIELD protection in right front wheel arch - R.R..

Proceed with refitting.

Proceed with refitting - 4450B04 right front wheel r r.

Fill the air conditioner coolant circuit - 0010T84 coolant for air conditioning system dehydrate and recharge.

Remove the car from the ramps.