Throttle body intergral with mds - r r

Operation 1056B15 · Multi-point injection system (mpi)

1.2 16v

Removing

Ensure that the ignition key is in OFF position, then disconnect the battery negative terminal (-).

Proceed with removal - 1048A32 sleeve from air cleaner to intake manifold - r + r.

1. Disconnect the electrical connection from the throtle body integrated with the M.D.S.

2. Undo the bolts (2a) and move the mounting bracket (2b) aside, complete with injection-ignition system control unit (2c).

3. Undo the remaining bolt (3a) and remove throttle body with integral MDS (3b)

1.4 16v

Removing

Ensure that the ignition key is in OFF position, then disconnect the battery negative terminal (-).

Proceed with removal - 1048A32 sleeve from air cleaner to intake manifold - r + r.

1. Disconnect the electrical connection from the throtle body integrated with the M.D.S.

2. Undo the bolts (2a) and move the mounting bracket (2b) aside, complete with injection-ignition system control unit (2c).

3. Undo the remaining bolt (3a) and remove throttle body with integral MDS (3b)

1.2 16v

Refitting

Refit the throttle body with integral MDS and secure with a bolt.

Place the mounting bracket, complete with injection-ignition system control unit, back in its housing and secure it using the bolts.

Connect the electrical connection to the throttle body integral with M.D.S.

Proceed with refitting - 1048A32 sleeve from air cleaner to intake manifold - r + r.

Connect the negative (-) battery terminal.

1.4 16v

Refitting

Refit the throttle body with integral MDS and secure with a bolt.

Place the mounting bracket, complete with injection-ignition system control unit, back in its housing and secure it using the bolts.

Connect the electrical connection to the throttle body integral with M.D.S.

Proceed with refitting - 1048A32 sleeve from air cleaner to intake manifold - r + r.

Connect the negative (-) battery terminal.