Workshop Manuals Factory service & repair Lancia
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Lancia Ypsilon Factory Service Manual (2003-2011)08 · Engine
08 · Engine

Fuel filler pipe union sleeve - r + r

Make
Lancia
Model
Ypsilon Factory Service Manual
Year
2003–2011
Section
Fuel tank and pipes › Fuel filler pipe union sleeve - r + r
EngineFuel filler pipe union sleeve - r + r

Fuel filler pipe union sleeve - r + r

Operation 1040A32 · Fuel tank and components

1.2 8v

Removing

Position the vehicle on the ramp.

Proceed with removal - 4450B08 right rear wheel r r.

Proceed with removal - 7055B45 right hand rear supplementary wheel arch - r+r.

1. Undo the bolts fixing the fuel filler pipe to the bodyshell.

2. Loosen the band (2a) and disconnect the fuel filler pipe (2b) from the tank.

3. Loosen the band (3a) and disconnect the fuel return pipe (3b).

4. Remove the sleeve joining the fuel filler pipe to the tank.

Fuel filler pipe union sleeve - r + r

1.2 16v

Removing

Position the vehicle on the ramp.

Proceed with removal - 4450B08 right rear wheel r r.

Proceed with removal - 7055B45 right hand rear supplementary wheel arch - r+r.

1. Undo the bolts fixing the fuel filler pipe to the bodyshell.

2. Loosen the band (2a) and disconnect the fuel filler pipe (2b) from the tank.

3. Loosen the band (3a) and disconnect the fuel return pipe (3b).

4. Remove the sleeve joining the fuel filler pipe to the tank.

Fuel filler pipe union sleeve - r + r

1.4 16v

Removing

Position the vehicle on the ramp.

Proceed with removal - 4450B08 right rear wheel r r.

Proceed with removal - 7055B45 right hand rear supplementary wheel arch - r+r.

1. Undo the bolt securing the fuel filler pipe to the body.

2. Loosen the band (2a) and disconnect the fuel filler pipe (2b) from the tank.

3. Loosen the band (3a) and disconnect return pipe (3b).

4. Remove the sleeve joining the fuel filler pipe to the tank.

Fuel filler pipe union sleeve - r + r

1.3 JTD

Removing

Place the car on a lift.

1. Undo the bolt fixing the fuel filler mounting bracket.

2. Remove the retaining band (2a) and disconnect the fuel filler pipe to the tank (2b).

3. Remove the retaining band (3a) and disconnect the drain pipe (3b).

4. Remove the sleeve joining the fuel filler pipe to the tank.

Fuel filler pipe union sleeve - r + r

1.2 8v

Refitting

Refit the hose joining the fuel filler pipe to the tank in its housing.

Connect the reflux pipe and secure it using the retaining band.

Connect thefuel filler pipe to the tank and secure it using the band.

Tighten the bolts fixing the fuel filler pipe to the bodyshell.

Proceed with refitting - 7055B45 right hand rear supplementary wheel arch - r+r.

Proceed with refitting - 4450B08 right rear wheel r r.

Remove the car from the ramps.

1.2 16v

Refitting

Refit the hose joining the fuel filler pipe to the tank in its housing.

Connect the return pipe and secure it using the retaining band.

Connect the fuel filler pipe to the tank and secure it using the band.

Tighten the bolts fixing the fuel filler pipe to the bodyshell.

Proceed with refitting - 7055B45 right hand rear supplementary wheel arch - r+r.

Proceed with refitting - 4450B08 right rear wheel r r.

Remove the car from the ramps.

1.4 16v

Refitting

Refit the hose joining the fuel filler pipe to the tank in its housing.

Connect the return pipe and secure it using the retaining band.

Connect the fuel filler pipe to the tank and secure it using the band.

Tighten the bolt securing the fuel filler pipe to the bodyshell.

Proceed with refitting - 7055B45 right hand rear supplementary wheel arch - r+r.

Proceed with refitting - 4450B08 right rear wheel r r.

Remove the car from the ramps.

1.3 JTD

Refitting

Fit the sleeve joining the fuel filler pipe to the tank.

Connect the reflux pipe and secure it using the retaining band.

Conect the pipe from the fuel filler pipe to the tank and secure it using the band.

Tighten the bolt fixing the fuel filler pipe mounting bracket.

Remove the vehicle from the lift.

Parts & tools for this job Staging For 2003 Lancia Ypsilon

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.