Engine oil pressure warning light switch - r + r
- Make
- Lancia
- Model
- Ypsilon Factory Service Manual
- Year
- 2003–2011
- Section
- Engine lubrication system › Engine oil pressure warning light switch - r + r
Engine oil pressure warning light switch - r + r
Removing
Position the vehicle on the ramp.
Ensure that the ignition key is in OFF position, then disconnect the battery negative terminal (-).
| Name | Connector | |
|---|---|---|
| Battery | A1B |
1. Disconnect the electrical connection from the engine oil pressure warning light switch.
| Name | Connector | |
|---|---|---|
| 1 | Engine oil pressure sensor (switch) | K30 |
2. Undo and remove the engine oil pressure warning light switch.
Removing
Position the vehicle on the ramp.
Ensure that the ignition key is in OFF position, then disconnect the battery negative terminal (-).
| Name | Connector | |
|---|---|---|
| Battery | A1B |
1. Disconnect the electrical connection from the engine oil pressure warning light switch.
| Name | Connector | |
|---|---|---|
| 1 | Engine oil pressure sensor (switch) | K30 |
2. Undo and remove the engine oil pressure warning light switch.
Removing
Position the vehicle on the ramp.
Ensure that the ignition key is in OFF position, then disconnect the battery negative terminal (-).
| Name | Connector | |
|---|---|---|
| Battery | A1B |
1. Disconnect the electrical connection from the engine oil pressure warning light switch.
| Name | Connector | |
|---|---|---|
| 1 | Engine oil pressure sensor (switch) | K30 |
2. Undo and remove the engine oil pressure warning light switch.
Removing
Ensure that the ignition key is in OFF position, then disconnect the battery negative terminal (-).
| Name | Connector | |
|---|---|---|
| Battery | A1B |
1. Disconnect the electrical connection from the engine oil pressure warning light switch.
| Name | Connector | |
|---|---|---|
| 1 | Engine oil pressure sensor (switch) | K30 |
2. Undo and remove the engine oil pressure warning light switch from the cylinder head.
Refitting
Fit the engine oil pressure warning light switch in its seating and tighten it to the recommended torque.
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| OIL PRESSURE W/L | M14 | 3.2 |
Connect the electrical connection to the engine oil pressure warning light switch.
Connect the negative (-) battery terminal.
Remove the car from the ramps.
Refitting
Fit the engine oil pressure warning light switch in its seating and tighten it to the recommended torque.
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| OIL PRESSURE W/L | M14 | 3.2 |
Connect the electrical connection to the engine oil pressure warning light switch.
Connect the negative (-) battery terminal.
Remove the car from the ramps.
Refitting
Fit the engine oil pressure warning light switch in its seating and tighten it to the recommended torque.
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| OIL PRESSURE W/L | M14 | 3.2 |
Connect the electrical connection to the engine oil pressure warning light switch.
Connect the negative (-) battery terminal.
Remove the car from the ramps.
Refitting
1. Fit the engine oil pressure warning light switch in its seating and tighten it to the recommended torque.
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| 1 | OIL PRESSURE W/L | M14 | (Cylinder head side) 2.9 ÷ 3.5 |
2. Connect the electrical connection to the engine oil pressure warning light switch.
Connect the negative (-) battery terminal.
Parts & tools for this job Staging For 2003 Lancia Ypsilon
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.