Thermostat unit - r+r
- Make
- Lancia
- Model
- Ypsilon Factory Service Manual
- Year
- 2003–2011
- Section
- Engine cooling › Thermostat unit - r+r
Thermostat unit - r+r
Removing
Proceed with removal - 5530B10 battery - r+r.
Proceed with removal - 5530B52 Battery DRIP TRAY/SUPPORT - R.R..
1. Loosen band and disconnect the upper coolant inlet hose to the radiator thermostat side.
Recover the coolant which comes out in a suitable container.
2. Undo the nuts (2a) and remove the thermostat unit (2b).
Removing
Proceed with removal - 1048A32 sleeve from air cleaner to intake manifold - r + r.
1. Loosen band and disconnect the upper coolant inlet hose to the radiator thermostat side.
Recover the coolant which comes out in a suitable container.
2. Undo the bolts (2a) and remove thermostat assembly (2b)
Removing
Proceed with removal - 1048A32 sleeve from air cleaner to intake manifold - r + r.
1. Loosen band and disconnect the upper coolant inlet hose to the radiator thermostat side.
Recover the coolant which comes out in a suitable container.
2. Undo the bolts (2a) and remove the thermostat assembly (2b).
Refitting
Place the thermostat back in its housing and fix it tightening the nuts to the recommended torque.
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| Nut | THERMOSTAT CONTAINER | M6 | 1.0 |
Connect the upper coolant inlet hose to the radiator, thermostat side, and tighten the band.
Proceed with refitting - 5530B52 Battery DRIP TRAY/SUPPORT - R.R..
Proceed with refitting - 5530B10 battery - r+r.
Refill the engine cooling system with coolant - 0010T20 coolant change.
Refitting
1. Place the thermostat assembly (1a) back in its housing and secure it tightening the bolts (1b) to the recommended torque.
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| 1b | Bolt | THERMOSTAT CONTAINER | M6 | 1 |
2. Connect the upper coolant inlet hose to the radiator, thermostat side, and tighten the band.
Refitting
1. Place the thermostat assembly (1a) back in its housing and secure it tightening the bolts (1b) to the recommended torque.
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| 1b | Bolt | THERMOSTAT CONTAINER | M6 | 1 |
2. Connect the upper coolant inlet hose to the radiator, thermostat side, and tighten the band.
Proceed with refitting - 1048A32 sleeve from air cleaner to intake manifold - r + r.
Refill the engine cooling system with coolant - 0010T20 coolant change.
Proceed with refitting - 1048A32 sleeve from air cleaner to intake manifold - r + r.
Refill the engine cooling system with coolant - 0010T20 coolant change.
Parts & tools for this job Staging For 2003 Lancia Ypsilon
- FLUIDCoolantSearch: Lancia coolant antifreeze
- PARTThermostatSearch: Lancia Ypsilon 2003 thermostat
- TOOLCooling system pressure testerSearch: cooling system pressure tester
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.