Engine RPM SENSOR - R.R.
- Make
- Lancia
- Model
- Ypsilon Factory Service Manual
- Year
- 2003–2011
- Section
- Diesel fuel injection › Engine RPM SENSOR - R.R.
EngineEngine RPM SENSOR - R.R.
Engine RPM SENSOR - R.R.
Removing
Ensure that the ignition key is in OFF position, then disconnect the battery negative terminal (-).
| Name | Connector | |
|---|---|---|
| Battery | A1B |
Proceed with removal.
1. Disconnect the electrical connection for the rpm sensor.
| Name | Connector | |
|---|---|---|
| 1 | Rpm sensor | K46 |
2. Undo the bolt (2a) and remove the engine rpm sensor (2b).
Refitting
1. Place the rpm sensor (1a) in its seating and secure it tightening the bolt (1b) to the specified torque.
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| 1b | Bolt | ENGINE RPM SENSOR | M6 | (Engine crankcase side) 0.8 ÷ 1.0 |
2. Connect the electrical connection for the rpm sensor.
Proceed with refitting.
Connect the negative (-) battery terminal.
Parts & tools for this job Staging For 2003 Lancia Ypsilon
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.