Analogue control panel - r+r

Operation 5560B10 · Analogue control panel

Removing

- 5040C12 air conditioner housing - r r with facia disconnected

- 7040A74 TRIM under control panel - R.R.

- 7040A11 control panel lid - r + r

1. Undo the bolts.

2. Move the instrument panel slightly.

1. Disconnect the electrical connection.

2. Recover the control panel.

Some CAN nodes, including the instrument panel, are programmed with default settings that the Customer will find when they acquire the vehicle. If the panel is replaced, the Parts Dept. will send a 'virgin' component: once fitted, the data stored in the Body Computer will have to be transferred to it by carrying out the PROXI ALIGNMENT procedure using the Examiner.

Refitting

Check that the instrument panel is not damaged.

Connect the electrical connection.

Refit the instrument panel and fix it using the bolt.

- 7040A11 control panel lid - r + r

- 7040A74 TRIM under control panel - R.R.

- 5040C12 air conditioner housing - r r with facia disconnected

Check the operation of the instrument and the functions controlled by it.