Ignition coil/s - r+r

Operation 5510C14 · Coil, ecu, sensors

1.2 8v

Removing

Ensure that the ignition key is in OFF position, then disconnect the battery negative terminal (-).

Proceed with removal - 1048A10 air cleaner filtering element - replace.

1. Disconnect the electrical connections from the ignition coils.

2. Disconnect the high tension leads from the ignition coil.

3. Undo the bolts (3a) and remove the ignition coils (3b).

1.2 16v, 1.4 16v

Removing

Ensure that the ignition key is in OFF position, then disconnect the battery negative terminal (-).

Proceed with removal - 1048A10 air cleaner filtering element - replace.

1. Disconnect the electrical connections from the ignition coils.

2. Undo the bolts (2a) and remove the ignition coils (2b).

1.2 8v

Refitting

Place the ignition coils back in their housings and tighten them using the bolts.

Connect the high tension leads to the ignition coils.

Connect the electrical connections to the ignition coils.

Proceed with refitting - 1048A10 air cleaner filtering element - replace.

Connect the negative (-) battery terminal.

1.2 16v, 1.4 16v

Refitting

Place the ignition coils back in their housings and tighten them using the bolts.

Connect the electrical connections to the ignition coils.

Proceed with refitting - 1048A10 air cleaner filtering element - replace.

Connect the negative (-) battery terminal.