Split rear seat assembly - r+r

Operation 7050A14 · Rear seat assembly

Removing

- 7050A22 rear seat cushion - r+r (left and right)

1. Release the retaining buttons (1a) using the special tool.

2. Remove the mat under the cushion.

1. Unscrew bolts (1a). If necessary, move the seat structure (1b) using the lever (1c) in order to reach some of the bolts.

2. Undo the pins.

3. Lower the backrests (3b) using the lever (3a) and remove the seat assembly.

1. If necessary, undo the bolts (1a) and remove the seat sliding brackets (1b).

Refitting

Check that the seat components are not damaged.

If removed, position the seat sliding brackets and secure them using the bolts.

Position the seat assembly, lift up the backrests and tighten the pins.

Tighten the bolts and refit the mat.

Engage the retaining buttons.

- 7050A22 rear seat cushion - r+r (left and right)

Check the operation of the rear seat.