AUTOCLOSE NOT WORKING (vehicle with passive entry)

Make: Lancia
Model: Thesis Factory Service Manual
Year: 2002–2009
Section: Doors › AUTOCLOSE NOT WORKING (vehicle with passive entry)

‹ Prev Boot opening not working using remote control Next › THE DOORS DO NOT OPEN (vehicle with Passive Entry)

Fault diagnosisAUTOCLOSE NOT WORKING (vehicle with passive entry)

AUTOCLOSE NOT WORKING (vehicle with passive entry)

2.4 JTD 10V · Passive Entry

The doors do not lock when you move away from the vehicle.

The engagement of the autoclose is signalled by a warning sound.

STEP	OPERATIONS TO BE CARRIED OUT	TEST RESULTS
0	PRELIMINARY CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check that the autoclose function has been set by the Connect	Move on to Step	The autoclose function has not been set	Set the autoclose function
1	CHECK USING DIAGNOSTIC EQUIPMENT	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Connect the Examiner diagnostic equipment to the diagnostic socket and check the following at the Passive Entry Node:In errors ambient that there are no faults	Move on to Step	Presence of faults	Continue following the instructions for the diagnostic equipment.
2	CHECK USING DIAGNOSTIC EQUIPMENT	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Keeping the diagnostic equipment connected, check the following at the Body Computer Node:In errors ambient that there are no faults In parameters ambient the status of the doors and the boot lid	Move on to Step	1. Presence of faults	1. Continue following the instructions in the diagnostic table
		Move on to Step	2. The status of the doors does not correspond (the doors are closed bu the Body Computer Node signals one or more doors open)	Move on to Step
3	ELECTRICAL SYSTEM CHECK.	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check the electrical connection between the Body Computer Node and the door status switch	Move on to Step	Connection broken	Restore the electrical connection [wiring diagram E7018] (Wiring Diagram ) E7018 PASSIVE ENTRY CONTROL UNIT
4	DOOR SWITCH CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check the operation of the door status switch located in the lock	Move on to Step	Switch broken	Replace the lock
5	CHECK ON CORRECT OPERATION	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check that the fault is no longer present		Fault persists	Replace the Passive Entry Node See in Op. 5580E70 Passive entry system electronic control unit - R.R.

‹ Prev Boot opening not working using remote control Next › THE DOORS DO NOT OPEN (vehicle with Passive Entry)

Parts & tools for this job Staging For 2002 Lancia Thesis

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.