CONNECTING ROD SMALL END BUSH (one) - Replace
- Make
- Lancia
- Model
- Thesis Factory Service Manual
- Year
- 2002–2009
- Section
- Pistons and connecting rods › CONNECTING ROD SMALL END BUSH (one) - Replace
‹ Prev PISTON and CONNECTING ROD SET - R.R. with engine and cylinder head(s) removedNext › Introduction timing system
EngineCONNECTING ROD SMALL END BUSH (one) - Replace
CONNECTING ROD SMALL END BUSH (one) - Replace
Removing
1. Remove the bush (1a) from the small end using a hydraulic press, a suitable plate (1b) and the tool (1c) constructed as illustrated in the diagram.
| Description | Code | Function | |
|---|---|---|---|
| 1c | Extractor/Fitting tool | 1.860.821.001 | Small end bush removal/introduction |
Refitting
1. Fit a new bush (1a) in the small end using a hydraulic press, a suitable plate (1b) and the tool (1c) constructed as illustrated in the diagram.
The bush should be fitted in the small end so that the lubrication port is aligned with the one in the small end.
| Description | Code | Function | |
|---|---|---|---|
| 1c | Extractor/Fitting tool | 1.860.821.001 | Small end bush removal/introduction |
- Ream the inner diameter of the small end bush to the recommended figure.
| Subject | Value | |
|---|---|---|
| Small end bush | mm | |
| Inner diameter | 26.006 ÷ 26.014 |
‹ Prev PISTON and CONNECTING ROD SET - R.R. with engine and cylinder head(s) removedNext › Introduction timing system
Parts & tools for this job Staging For 2002 Lancia Thesis
- PARTEngine gasket setSearch: Lancia Thesis 2002 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.