Rear lambda sensor - r.r.
- Make
- Lancia
- Model
- Thesis Factory Service Manual
- Year
- 2002–2009
- Section
- Emission control system › Rear lambda sensor - r.r.
REAR LAMBDA SENSOR - R.R.
Removing
- Open the boot and disconnect the negative battery terminal.
See in Op. 1048A21 AIR INLET HOSE FROM INTAKE TO FILTER - R.R.
1. Disconnect the electrical connection for the rear Lambda sensor.
| Description | Connector | |
|---|---|---|
| 1 | Lambda sensor on catalyzer 2 | K018 |
2. Undo and remove the rear Lambda sensor.
Refitting
- Position the rear Lambda sensor in its housing and tighten it to the recommended torque.
| Value - daNm | Fastening | Component | Ø | |
|---|---|---|---|---|
| 4.5 | LAMBDA PROBE (ONE) | M18 X 1.5 |
- Connect the electrical connection for the rear Lambda sensor.
| Description | Connector | |
|---|---|---|
| Lambda sensor on catalyzer 2 | K018 |
See in Op. 1048A21 AIR INLET HOSE FROM INTAKE TO FILTER - R.R.
- Connect the negative battery lead.
Removing
- Open the boot and disconnect the negative battery terminal.
See in Op. 1048A21 AIR INLET HOSE FROM INTAKE TO FILTER - R.R.
1. Disconnect the electrical connection for the rear Lambda sensor.
- Raise the lift.
1. Undo and remove the rear Lambda sensor (1a) using a USAGE 875/22 type spanner (1b) or a similar tool.
Refitting
- Position the rear Lambda sensor in its housing and tighten it to the recommended torque.
| Value - daNm | Fastening | Component | Ø | |
|---|---|---|---|---|
| 4.5 | LAMBDA PROBE (ONE) | M18 X 1.5 |
- Lower the lift.
- Connect the electrical connection for the rear Lambda sensor.
See in Op. 1048A21 AIR INLET HOSE FROM INTAKE TO FILTER - R.R.
- Connect the negative battery lead.
Parts & tools for this job Staging For 2002 Lancia Thesis
- PARTOxygen sensorSearch: Lancia Thesis 2002 oxygen sensor
- TOOLOxygen sensor socketSearch: oxygen sensor socket
- TOOLOBD2 scannerSearch: OBD2 scanner
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.