Engine oil recovery pipe - R&R

Operation 1080D30 · CRANKCASE VAPOUR/GAS RECIRCULATION SYSTEM

2.4 JTD 20V

Removing

- Position the vehicle on a lift.

See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.

1. Disconnect the engine oil vapour pipe from the separator.

2. Disconnect the engine oil vapour pipe from the oil sump.

3. Remove the engine oil recovery pipe frm the lower part of the engine compartment.

Refitting

- Fit the engine oil recovery pipe and connect to the engine oil sump.

- Connect the engine oil recovery pipe to the engine oil vapour separator.

See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.

- Remove the vehicle from the lift.