Workshop Manuals Factory service & repair Lancia
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Service news bulletins24 Special tools
Lancia Thesis Factory Service Manual (2002-2009)16 · Electrical equipment
16 · Electrical

AIR BAG MODULE (passenger side) - R.R.

Make
Lancia
Model
Thesis Factory Service Manual
Year
2002–2009
Section
Special accessories › AIR BAG MODULE (passenger side) - R.R.
Electrical equipmentAIR BAG MODULE (passenger side) - R.R.

AIR BAG MODULE (passenger side) - R.R.

Operation 5580C22 · AIR BAG SYSTEM

before removing and refitting the Air Bag module the following preliminary operations must be carried out: (1) turn the ignition key to the OFF position and extract it; (2) open the boot lid, disconnect the negative battery terminal and insulate the leads; (3) wait for 10 minutes before continuing.

FOLLOW ALL THE RECOMMENDED SAFETY INSTRUCTIONS (see assembly 5580C - AIR BAG SYSTEM).

Removing

See in Op. 7040A31 Compartment in dashboard - R.R.

1. Undo the Air Bag (1b) fixing bolts (1a).

- Move Air Bag module aside.

2. Release the safety retainer for the connectors using the special tool.

3. Disconnect the electrical connector.

DescriptionConnector
3Air Bag in dashboard (passenger side)Q011

- Keep the Air Bag module.

AIR BAG MODULE (passenger side) - R.R.

- Place the Air Bag module in the special cupboard resting it on a free surface with the bag facing upwards.

1. If necessary, undo the bolts fixing the brackets.

2. Keep the brackets.

AIR BAG MODULE (passenger side) - R.R.

Refitting

- Observe the following precaution.

Handle the Air Bag module very carefully. Make sure that the battery is disconnected.

- If a new module is being fitted, position the labels. Remove the detachable part of the adhesive label from the new module and place it in the special folder containing the vehicle details (model, registration date, chassis number) and the serial number of the old module. The file should be kept for future checks. A new adhesive plate comes together with the module and should be stuck on top of the existing one. Beforehand, however, it should be perforated at the month and 10 years after the year in which the module is being fitted (e.g. 2010 for 2000).

- If they have been removed, position the brackets and secure them using the fixing bolts.

- Connect the electrical connector.

DescriptionConnector
Air Bag in dashboard (passenger side)Q011

- Fit the connector safety retainers.

- Place the Air Bag module back in its housing.

- Secure the Air Bag module tightening the fixing nuts.

See in Op. 7040A31 Compartment in dashboard - R.R.

- Connect the negative battery terminal.

- Check the operation of the system using the Examiner or other diagnostic equipment.

Parts & tools for this job Staging For 2002 Lancia Thesis

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.