CLUTCH - R.R. with gearbox removed
- Make
- Lancia
- Model
- Thesis Factory Service Manual
- Year
- 2002–2009
- Section
- Clutch mechanisms › CLUTCH - R.R. with gearbox removed
CLUTCH - R.R. with gearbox removed
Removing
1. Fit the counter-torque tool to stop the rotation of the flywheel.
| Description | Code | Function | |
|---|---|---|---|
| 1 | Counter-torque | 1.860.846.000 | Engine flywheel lock |
2. Undo the bolts (2a) and remove the pressure plate (2b) and the clutch disc (2c).
Refitting
1. Position the pressure plate (1a), complete with clutch disc (1b) in its housing using the tool (1c) and secure it tightening the bolts (1d) to the recommended torque.
| Description | Code | Function | |
|---|---|---|---|
| 1c | Clutch locating tool | 1.870.447.000 | Tool for centering clutch plate on engine flywheel |
| Value - daNm | Fastening | Component | Ø | |
|---|---|---|---|---|
| 1d | 2.8 | Bolt | CLUTCH ASSEMBLY | M8 |
2. Remove the counter-torque tool for stopping the rotation of the flywheel.
| Description | Code | Function | |
|---|---|---|---|
| 2 | Counter-torque | 1.860.846.000 | Engine flywheel lock |
Removing
- Fit the counter-torque tool to stop the rotation of the flywheel.
| Description | Code | Function | |
|---|---|---|---|
| Counter-torque | 1.860.846.000 | Removing - refitting clutch |
1. Undo the fixing bolts (1a) and remove the clutch (1b).
Refitting
1. Position the complete clutch in the special housing and centre the clutch in relation to the crankshaft using the tool.
| Description | Code | Function | |
|---|---|---|---|
| 1b | Clutch locating tool | 1.870.081.000 | Refitting clutch |
2. Tighten the bolts fixing the clutch.
- Remove the tools used previously.
| Description | Code | Function | |
|---|---|---|---|
| Counter-torque | 1.860.846.000 | Removing - refitting clutch |
| Description | Code | Function | |
|---|---|---|---|
| Clutch locating tool | 1.870.081.000 | Centering clutch |
- Tighten the bolts fixing the clutch drip tray to the flywheel to the recommended torque.
| Value - daNm | Fastening | Component | Ø | |
|---|---|---|---|---|
| 2.8 | Bolt | CLUTCH ASSEMBLY | M8 |
- Remove and fit the clutch assembly using the specific procedure and tools described for engine service.
Parts & tools for this job Staging For 2002 Lancia Thesis
- PARTClutch kitSearch: Lancia Thesis 2002 clutch kit
- TOOLClutch alignment toolSearch: clutch alignment tool
- FLUIDGear oilSearch: Lancia Thesis manual gearbox oil
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.