FLEXIBLE PIPE TO rear BRAKE CALIPERS

Operation 3330E30 · HYDRAULIC BRAKE SYSTEM PIPES

Removing

- Position the vehicle on a lift.

See in Op. 4450B11 Rear WHEEL (one) - R.R.

See in Op. 7055B45 Right rear wheel arch liner - R.R.

1. Undo the connector for the flexible section (1a) to the rigid section (1b) of the front caliper.

2. Remove the fastening spring and release the flexible section of the pipe from the rigid section.

3. Release the flexible pipe from the mounting on the bodyshell.

4. Undo the connector (4a) from the brake caliper, then remove the flexible pipe (4b) to the front brake caliper.

Refitting

- Fit the flexible pipe tightening the connectors to the front brake caliper and to the rigid section.

- Tighten the connectors to torque.

- Secure the fastening spring to the rigid section.

- Secure the brake pipe to the mounting on the mounting bracket.

- [0010T64]

- [0010T65]

See in Op. 7055B45 Right rear wheel arch liner - R.R.

See in Op. 4450B11 Rear WHEEL (one) - R.R.

- Remove the vehicle from the lift.