FRONT BRAKE CALIPER (one) - R.R. - Includes bleeding air

Operation 3310A30 · FRONT DISC BRAKES

Removing

- Position the vehicle on a lift.

See in Op. 4450B10 Front WHEEL (one) - R.R.

1. Undo the connector (1a), remove the spring (1b) and release the flexible section (1c) from the rigid section of the brake pipe (1d).

1. Release the brake pipe from the mounting on the bracket on the hub.

2. Undo the fixing bolts.

3. Remove the brake caliper complete with flexible pipe.

Refitting

- Compress the front brke caliper piston, using a suitable tool, to facilitate the fitting of the actual caliper.

- Fit the front brake caliper complete with flexible pipe.

- Tighten the bolts fixing the brake caliper to the bracket.

- Connect the flexible section to the rigid section of the brake pipe.

- Tighten the connector for the rigid section to the flexible section to torque.

- Secure the brake pipe to the mounting on the bracket.

See in Op. 0010T64 Brake and/or clutch fluid - Check level and top up, if necessary

- [0010T64]

See in Op. 0010T65 HYDRAULIC BRAKING SYSTEM - BLEED AIR

- [0010T65]

See in Op. 4450B10 Front WHEEL (one) - R.R.

- Remove the vehicle from the lift.