Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Ulysse Factory Service Manual (2002-2010)22 · Fault diagnosis
22 · Diagnostics

Alarm siren not working

Make
Fiat
Model
Ulysse Factory Service Manual
Year
2002–2010
Section
Alarm › Alarm siren not working
Fault diagnosisAlarm siren not working

ALARM SIREN NOT WORKING

The siren is connected to the Alarm Node

The alarm node is operated and controlled by the Body Computer Node via the VAN CAR2 network. If there is a fault, the Body Computer Node detects and memorizes the causes of the malfunction.

The networks are on stand-by 30 mins after the engine is switched off. This makes it impossible to carry out the fault diagnosis. If a diagnostic session has to be opened, start up the engine to reawaken the networks.

STEPOPERATIONS TO BE CARRIED OUTTEST RESULTS
1CHECK USING DIAGNOSTIC EQUIPMENTALL OKPROBLEMS ENCOUNTEREDACTION
Connect the Examiner diagnostic equipment to the diagnostic socket and check the siren enablement in the configuration ambient at the Body Computer Node.Move on to StepSiren not enabled.Enable the siren.
2CHECK USING DIAGNOSTIC EQUIPMENTALL OKPROBLEMS ENCOUNTEREDACTION

Check the following at the Body Computer Node in the active diagnosis ambient:

  • siren activation.
Move on to StepThe siren is not activated.Move on to Step
3ELECTRICAL SYSTEM CHECKALL OKPROBLEMS ENCOUNTEREDACTION
Check the siren power supply and siren connections with the Alarm Node (NAL)Move on to StepElectrical equipment does not conform.Repair wiring.
4CHECK USING DIAGNOSTIC EQUIPMENTALL OKPROBLEMS ENCOUNTEREDACTION

Connect the Examiner diagnostic equipment to the diagnostic socket and check that the following errors are not present in the alarm ambient:

  • Siren defective
  • Control unit broken (NAL)
Move on to Step1. Siren error.1. Replace the siren.
2. Control unit broken (NAL).2. Replace the NAL.
5CHECK ON CORRECT OPERATIONALL OKPROBLEMS ENCOUNTEREDACTION
Check that the fault is no longer present.

Parts & tools for this job Staging For 2002 Fiat Ulysse

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.