Throttle case - r + r
- Make
- Fiat
- Model
- Ulysse Factory Service Manual
- Year
- 2002–2010
- Section
- Petrol injection system › Throttle case - r + r
THROTTLE CASE - R + R
Removing
- Disconnect the negative battery terminal.
| Description | Connector | |
|---|---|---|
| Battery | A001B |
Op. 5010B18 CLIMATE CONTROL UNIT AIR INTAKE - R.R.
Op. 1048A47 SLEEVE FROM RIGID PIPE TO THROTTLE BODY - R R
1. Disconnect the engine oil vapour recovery pipe from the throttle casing.
2. Release the wiring from the retaining clip and disconnect the electrical connection from the throttle casing actuator.
| Description | Connector | |
|---|---|---|
| 2 | Integrated throttle casing actuator | N075 |
3. Undo the fixing bolts (3a) and remove the throttle casing (3b).
Refitting
1. Remove the gasket and replace it.
- Position the throttle casing and tighten the fixing bolts to the recommended torque.
| Value - daNm | Fastening | Component | Ø | |
|---|---|---|---|---|
| 1.0 | Bolts | THROTTLE CASING - R.R. |
- Connect the electrical connection to the throttle casing actuator and secure the wiring to the retaining clip
| Description | Connector | |
|---|---|---|
| Integrated throttle casing actuator | N075 |
- Connect the engine oil vapour recovery pipe.
Op. 1048A47 SLEEVE FROM RIGID PIPE TO THROTTLE BODY - R R
Op. 5010B18 CLIMATE CONTROL UNIT AIR INTAKE - R.R.
- Connect the negative battery terminal.
| Description | Connector | |
|---|---|---|
| Battery | A001B |
Parts & tools for this job Staging For 2002 Fiat Ulysse
- PARTEngine gasket setSearch: Fiat Ulysse 2002 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.